Summary: If your iPhone‘s speaker sound is distorted, water droplets are behind the camera lens, the touchscreen is unresponsive, or the foggy camera lens is, and the iPhone shuts down randomly. It’s all a sign that water is trapped in your iPhone.
If your iPhone 13 gets water inside, turn it off immediately. Remove any accessories and try drying with a free lint cloth. Hold the phone with the speaker side down to get out of the water.
To remove water from iPhone 13, use the Siri shortcut or silica gel packets to absorb moisture. But please avoid harmful methods like heat or rice.
If you accidentally dropped your iPhone 13 into the water. Now the iPhone 13 is rated IP68, which means the device can go to maximum depth into water (6 meters) for up to 30 minutes, so it was not enough.
Well, if you noticed your iPhone showing moisture on its body, the water is going inside this. If you don’t know how to remove water from your iPhone 13,.
Don’t worry; you are not alone. This complete article is for you.
The iPhone 13’s Water Resistance Ability
The iPhone 13 has an IP68 rating of water resistance. It means the iPhone 13 can stop water for 30 minutes at 6 meters deep into the water. But that doesn’t mean it’s safe from water damage. Over time, seals that protect the device from water damage can be out of order.
The iPhone 13 does not have a built-in feature that automatically ejects or removes water from the device.
Note: Apple watches have a built-in feature that uses sound pulses to eject water from the speaker.
But we can’t say the same about the iPhone. So it’s important to know how to remove water from your iPhone 13 with simple and quick steps.
Signs That Your iPhone 13 Has Water Inside
Before going into a deep study on how to remove water from an iPhone 13. You should know whether the water gets inside the iPhone 13 or not. We discussed a few symbols, which show the water is trapped in your device.
- Distorted sound from the speakers.
- Water droplets behind the camera lens or under the screen.
- Touchscreen unresponsiveness or erratic behavior.
- Foggy camera lenses.
- The device shuts down randomly.
If you notice any of these symbols, you will know that water is trapped in your device.
Frequently Taken Steps After Water Exposure
1. Immediately Turn Off Your iPhone 13
If your iPhone 13 is exposed to water symptoms, the first step you should take is to immediately turn off your iPhone. If you don’t do this, your iPhone faces many problems, like electrical issues or short circuits. Here is how to turn off the iPhone 13:
To turn off your iPhone 13:
- Press and hold both the side button and volume button simultaneously.
- The “slide to power off” option appears.
- Slide to power off; now your iPhone is turned off.
Remember: Avoid turning it on until the water has been removed. Otherwise, it can create some issues or damage your device.
2. Remove Any Case or Accessories
If you cover your iPhone 13 with the case or any other accessories, like a screen protector or pocket socket, remove it immediately. These accessories can slow down the drying process
3. Use Lint-Cloth for Drying Exterior
Try drying the exterior or body of your iPhone 13 using a lint cloth, especially the main parts like the charging port, speaker, and volume button, where the water might easily be collected.
4. Hold Your iPhone with the Speaker Side Down
Hold your iPhone and move it like its speaker side down, which helps drain any water from the device. Finally, try to keep a safe iPhone speaker and charging port from water damage.
How to Remove Water from an iPhone 13 Speaker: 4 Best Methods
1. Eject Water with a Shortcut
The first best method I recommend to eject or remove water from an iPhone 13 is the Water Eject Shortcut. It is a free app that should already be on your iPhone, otherwise, you can download it from the Apple Store. This is the best method to remove water from an iPhone because it uses sound frequencies to eject water from the speaker grill. This process is also called Siri shortcut.
Here’s how to eject water from the iPhone using the Siri shortcut:
- Install the Shortcut: Install the shortcut through the shortcut app.
- Click the add shortcut button at the bottom of the screen to add shortcuts in your shortcut library, then tap Done at the top of the page.
- Invoke Siri and ask Water Eject” on your iPhone.
- Now, click on the start button and choose the intensity level. Level 1 will process it once, level 2 will process it twice, and level 3 will process it three times. (recommended: 3rd level).
- After that, wait for a few seconds (10 seconds) to complete this process).
- After completing this process, the Siri shortcut turns down the iPhone volume by 50 percent and shows a notification that liquid has been successfully ejected from your iPhone.
Keep in mind: Do not wear headphones during this process.
2. Use Silica Gel Packs
If the water on your iPhone has gone deeper, then silica gel is the best method of moisturizing the water. Silica gel small packets are the best way to keep your iPhone in the box of my milky. This is the best way.
Here’s how to use silica gel:
- Put your iphone into Silica gel which shouid be in sealed container.
- After that,wait for 24-48 hours
- Remember, don’t turn on your iphone during this time.
With the help of silica gel, you can remove the moisture present inside your phone, which can damage its internal components.
Recommended: How to record voice on your iPhone
3. Remove water using Fan or Airflow
If you have no silica gel packets, you need to dry your iPhone using a fan. Set your phone with air blowing in the charging port and speakers directly. Make sure the airflow is cool you could burn out your phone’s internals with heat.
4. Vacuum the Water Out
If you have a vacuum cleaner with a narrow nozzle, use this accessory to remove water from your iPhone 13 as mentioned above. Do not get too close to the vacuum nor use full suction, as you can end up fairly damaging your phone.
Here is how to use the vacuum:
- Put the vacuum in a low-suction setting.
- Focus on the main areas, like the speaker grill and charging port.
Avoid doing this when removing water from iPhone 13
1. Avoid using a Hair Dryer or Heat
Using a hairdryer to try and remove water from your phone is one of the first mistakes people have that you should avoid.
This is not recommended, as the heat exploits your iPhone 13 internals, possibly melting sensitive parts or pushing water deeper into the device.
2. Do not use Rice as a Dryer
Contrary to popular belief, rice is not the best way to remove water from your iPhone. The rice could also leave particulates or grains all over the inside of your phone, which could only further damage it.
Secondly, rice does not help much when it comes to extracting moisture from all the hard-to-reach areas.
What to Do if Your iPhone 13 Shows Signs of Damage
1. Check Liquid Contact Indicator (LCI)
The iPhone 13 comes with a small indicator called Liquid Contact Indicator (LCI), which changes color from white to red after contact with water. To check LCI, you have to remove your SIM tray.
- SIM tray ejected.
- Use a small flashlight.
- Look into the SIM card slot.
- If the color of the indicator is red, then you have water damage.
2. Contact the Apple store
If water is not removed using all the methods above, you can contact Apple Support.
This can help solve more problems. You can also arrange for repair services if needed.
Important points:
- Avoid using headphones (wired or wireless). Otherwise, the sound will emit from your earbuds, not the phone speaker, so water will not be removed from your iPhone.
- Increase your phone volume everywhere. The higher the volume, the higher the vibration, and the more water will be removed from your speaker.
- Give some time for the iPhone to dry before using the speaker (back to normal)
FAQs about how to remove Water from iPhone 13
Q1: How do I know if there’s still water inside my iPhone 13?
If the sound of your phone is muffled or the buttons do not respond, water may have still found its way into it. For any remaining moisture inside the device, you shall use either of two methods Water Eject Shortcut or silica gel method.
Q2: Can I charge my iPhone 13 after it gets wet?
No, avoid charging your iPhone 13 if it’s been exposed to water. Wait until the device is completely dry before plugging it into a charger. Charging your phone while it’s still wet could cause a short circuit.
Q3: Is iPhone 13 waterproof?
The iPhone 13 is water-resistant, not waterproof. It is water resistant, which means it can take splashes and short dunks in H2O but does not go deeper underwater or for too long as any submersion beyond the IP68 rating will defeat its capability to resist H2O damage.
Q4: How long does it take to dry out an iPhone 13?
Depending on the amount of water in your iPhone 13 (or how much was trapped inside), can be between 24 and 48 hours before you can fully dry it out. Using methods like silica gel packets or other ways to dry the phone faster.
Q5: Will Apple repair water damage under warranty?
Water damage is typically not covered under Apple’s standard warranty. However, if you have AppleCare+, accidental water damage may be covered for a service fee.
Conclusion
How to Remove Water From your iphone 13 Avoid harm. If you can take action and dry out your wet system, this may help save lot of cash on buying a fresh gadget, rather than forking hundreds in repairs.
As water-resistant as the iPhone 13 is, you still need to do something about it if your phone gets wet.
Switch off your device, this employs methods like the Water Eject Shortcut or merely set in a whole within rice, but prevent dangerous practices such as heat and using rice on absorbed water.
If the iPhone is still unresponsive, iMyFone Fixppo can only enter or exit recovery mode on your device, but not fix it as images above.
If there is no result after trying these methods, then contacting Apple Support or heading to an Authorized Repair Center will be a great choice for you. Stay Safe!
This way, you can get rid of the water on your iPhone 13 (read: wet cell phones linked here:) without too much trouble.